<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 8776] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <RegistrationClickCenter>
    <x>0</x>
    <y>0</y>
    <z>0</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>0</x>
    <y>1</y>
    <z>0</z>
  </AxisAsymmetric>
  <DisplayInformation>Camlog - CAMLOG® Titanium base CAD/CAM free for crown</DisplayInformation>
  <IsWithInterface>true</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <Keyword>camlog_CAMLOG_ti-base_CADCAM_free_crown</Keyword>
  <SupportOrientation>1</SupportOrientation>
  <AxisScrewChannel>
    <x>0</x>
    <y>0.017452406437283512</y>
    <z>0.99984769515639127</z>
  </AxisScrewChannel>
  <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
  <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
  <ReferenceHeightOffset>0</ReferenceHeightOffset>
  <ReferenceRotationOffset>180</ReferenceRotationOffset>
  <RotationLockCount>3</RotationLockCount>
  <Supplier>CAMLOG Biotechnologies</Supplier>
  <SupplierLink>https://www.camlog.com</SupplierLink>
  <SupplierVersion>2024-11-01 (only for DentalCAD 3.2 or higher)</SupplierVersion>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <PreviewV4IconFilename>preview.png</PreviewV4IconFilename>
  <SupplierV4IconFilename>CL_Camlog.jpg</SupplierV4IconFilename>
  <TypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_3.3_CADCAMfreeShort_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_3.3_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_3.3_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 3.3 Ti-base free short K2247.3348</DisplayInformation>
      <Keyword>CAMLOG33Ti-basefreeshortK22473348</Keyword>
      <ClosedSupportFilename>CAMLOG_3.3_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.4</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.2</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P33</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.086956143379211426</x>
            <y>-1.600006103515625</y>
            <z>6.87607479095459</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_3.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.12648224830627441</x>
            <y>-1.600006103515625</y>
            <z>6.99465274810791</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_3.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.028779745101928711</x>
            <y>-1.529998779296875</y>
            <z>7.0517349243164063</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1400_Scanbody_3.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.012764155864715576</x>
            <y>-1.5336074829101563</y>
            <z>9.3005180358886719</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-A_Scanbody_3.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-A</DisplayInformation>
          <Keyword>ELOS9A-A</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0047379732131958008</x>
            <y>-1.3313674926757813</y>
            <z>9.4702224731445313</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-A_Scanbody_3.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-A</DisplayInformation>
          <Keyword>ELOSIO9A-A</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.036674082279205322</x>
            <y>-2.3000030517578125</y>
            <z>7.4621458053588867</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D3.300_Scanbody_3.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.022987842559814453</x>
            <y>-1.6999969482421875</y>
            <z>6.4934425354003906</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM33_Scanbody_3.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0821387767791748</x>
            <y>-2.5838623046875</y>
            <z>11.833200454711914</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.039104788010491234</x>
            <y>-0.99923511525298925</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP25-SU0052_Scanbody_3.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>2.3</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_3.8_CADCAMfreeShort_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_3.8_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_3.8_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 3.8 Ti-base free short K2247.3848</DisplayInformation>
      <Keyword>CAMLOG38Ti-basefreeshortK22473848</Keyword>
      <ClosedSupportFilename>CAMLOG_3.8_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.3</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.2</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P38</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.089708328247070313</x>
            <y>-1.600006103515625</y>
            <z>6.8946895599365234</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_3.8_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0060429573059082031</x>
            <y>-1.600006103515625</y>
            <z>6.9574389457702637</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_3.8_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0060429573059082031</x>
            <y>-1.529998779296875</y>
            <z>7.1456866264343262</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1410_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.014873504638671875</x>
            <y>-1.6089248657226563</y>
            <z>9.2373237609863281</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-B_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-B</DisplayInformation>
          <Keyword>ELOS9A-B</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.02695918083190918</x>
            <y>-1.6089248657226563</y>
            <z>9.2373237609863281</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-B_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-B</DisplayInformation>
          <Keyword>ELOSIO9A-B</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.034682691097259521</x>
            <y>-2.3000030517578125</y>
            <z>7.3942117691040039</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D3.800_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-1.75</y>
            <z>6.4581294059753418</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM38_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.10425806045532227</x>
            <y>-2.5828094482421875</y>
            <z>11.899559020996094</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.046977976440947145</x>
            <y>-0.99889592537436744</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP26-SU0053_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>2.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_3.8-PS_CADCAMfreeShort_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_3.8_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_3.8_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 3.8PS Ti-base free short K2247.3808</DisplayInformation>
      <Keyword>CAMLOG38PSTi-basefreeshortK22473808</Keyword>
      <ClosedSupportFilename>CAMLOG_3.8PS_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.8</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.2</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P38</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.089708328247070313</x>
            <y>-1.600006103515625</y>
            <z>6.8946895599365234</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_3.8_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0060429573059082031</x>
            <y>-1.600006103515625</y>
            <z>6.9574389457702637</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_3.8_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0060429573059082031</x>
            <y>-1.529998779296875</y>
            <z>7.1456866264343262</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1410_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.014873504638671875</x>
            <y>-1.6089248657226563</y>
            <z>9.2373237609863281</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-B_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-B</DisplayInformation>
          <Keyword>ELOS9A-B</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.02695918083190918</x>
            <y>-1.6089248657226563</y>
            <z>9.2373237609863281</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-B_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-B</DisplayInformation>
          <Keyword>ELOSIO9A-B</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.034682691097259521</x>
            <y>-2.3000030517578125</y>
            <z>7.3942117691040039</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D3.800_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-1.75</y>
            <z>6.4581294059753418</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM38_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.10425806045532227</x>
            <y>-2.5828094482421875</y>
            <z>11.899559020996094</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.046977976440947145</x>
            <y>-0.99889592537436744</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP26-SU0053_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>2.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_3.8_CADCAMfreeLong_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_3.8_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_3.8_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 3.8 Ti-base free long K2265.3848</DisplayInformation>
      <Keyword>CAMLOG38Ti-basefreelongK22653848</Keyword>
      <ClosedSupportFilename>CAMLOG_3.8_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.3</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.2</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P38</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.089708328247070313</x>
            <y>-1.600006103515625</y>
            <z>6.8946895599365234</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_3.8_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0060429573059082031</x>
            <y>-1.600006103515625</y>
            <z>6.9574389457702637</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_3.8_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0060429573059082031</x>
            <y>-1.529998779296875</y>
            <z>7.1456866264343262</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1410_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.014873504638671875</x>
            <y>-1.6089248657226563</y>
            <z>9.2373237609863281</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-B_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-B</DisplayInformation>
          <Keyword>ELOS9A-B</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.02695918083190918</x>
            <y>-1.6089248657226563</y>
            <z>9.2373237609863281</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-B_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-B</DisplayInformation>
          <Keyword>ELOSIO9A-B</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.034682691097259521</x>
            <y>-2.3000030517578125</y>
            <z>7.3942117691040039</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D3.800_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-1.75</y>
            <z>6.4581294059753418</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM38_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.10425806045532227</x>
            <y>-2.5828094482421875</y>
            <z>11.899559020996094</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.046977976440947145</x>
            <y>-0.99889592537436744</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP26-SU0053_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>2.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_3.8-PS_CADCAMfreeLong_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_3.8_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_3.8_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 3.8PS Ti-base free long K2265.3808</DisplayInformation>
      <Keyword>CAMLOG38PSTi-basefreelongK22653808</Keyword>
      <ClosedSupportFilename>CAMLOG_3.8PS_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.8</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.2</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P38</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.089708328247070313</x>
            <y>-1.600006103515625</y>
            <z>6.8946895599365234</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_3.8_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0060429573059082031</x>
            <y>-1.600006103515625</y>
            <z>6.9574389457702637</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_3.8_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0060429573059082031</x>
            <y>-1.529998779296875</y>
            <z>7.1456866264343262</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1410_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.014873504638671875</x>
            <y>-1.6089248657226563</y>
            <z>9.2373237609863281</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-B_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-B</DisplayInformation>
          <Keyword>ELOS9A-B</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.02695918083190918</x>
            <y>-1.6089248657226563</y>
            <z>9.2373237609863281</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-B_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-B</DisplayInformation>
          <Keyword>ELOSIO9A-B</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.034682691097259521</x>
            <y>-2.3000030517578125</y>
            <z>7.3942117691040039</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D3.800_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-1.75</y>
            <z>6.4581294059753418</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM38_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.10425806045532227</x>
            <y>-2.5828094482421875</y>
            <z>11.899559020996094</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.046977976440947145</x>
            <y>-0.99889592537436744</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP26-SU0053_Scanbody_3.8_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>2.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_4.3_CADCAMfreeShort_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_4.3_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_4.3_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 4.3 Ti-base free short K2247.4348</DisplayInformation>
      <Keyword>CAMLOG43Ti-basefreeshortK22474348</Keyword>
      <ClosedSupportFilename>CAMLOG_4.3_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.3</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.2</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P43</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.025616884231567383</x>
            <y>-1.600006103515625</y>
            <z>6.9565963745117188</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.043069005012512207</x>
            <y>-1.600006103515625</y>
            <z>7.0390195846557617</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0018575191497802734</x>
            <y>-1.5800018310546875</y>
            <z>7.3961873054504395</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1420_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.011879801750183105</x>
            <y>-1.5929641723632813</y>
            <z>9.2507114410400391</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-C_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-C</DisplayInformation>
          <Keyword>ELOS9A-C</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0018575191497802734</x>
            <y>-1.6257095336914063</y>
            <z>9.2232370376586914</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-C_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-C</DisplayInformation>
          <Keyword>ELOSIO9A-C</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0099630355834960938</x>
            <y>-2.3000030517578125</y>
            <z>7.4315366744995117</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D4.300_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-2.0999984741210938</y>
            <z>6.5466084480285645</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM43_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.17061710357666016</x>
            <y>-2.5780258178710938</y>
            <z>11.921679496765137</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.073018556589502681</x>
            <y>-0.997330582301368</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP27-SU0054_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>4.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_4.3-PS_CADCAMfreeShort_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_4.3_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_4.3_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 4.3PS Ti-base free short K2247.4308</DisplayInformation>
      <Keyword>CAMLOG43PSTi-basefreeshortK22474308</Keyword>
      <ClosedSupportFilename>CAMLOG_4.3PS_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.8</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.2</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P43</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.025616884231567383</x>
            <y>-1.600006103515625</y>
            <z>6.9565963745117188</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.043069005012512207</x>
            <y>-1.600006103515625</y>
            <z>7.0390195846557617</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0018575191497802734</x>
            <y>-1.5800018310546875</y>
            <z>7.3961873054504395</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1420_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.011879801750183105</x>
            <y>-1.5929641723632813</y>
            <z>9.2507114410400391</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-C_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-C</DisplayInformation>
          <Keyword>ELOS9A-C</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0018575191497802734</x>
            <y>-1.6257095336914063</y>
            <z>9.2232370376586914</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-C_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-C</DisplayInformation>
          <Keyword>ELOSIO9A-C</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0099630355834960938</x>
            <y>-2.3000030517578125</y>
            <z>7.4315366744995117</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D4.300_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-2.0999984741210938</y>
            <z>6.5466084480285645</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM43_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.17061710357666016</x>
            <y>-2.5780258178710938</y>
            <z>11.921679496765137</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.073018556589502681</x>
            <y>-0.997330582301368</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP27-SU0054_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>4.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_4.3_CADCAMfreeLong_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_4.3_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_4.3_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 4.3 Ti-base free long K2265.4348</DisplayInformation>
      <Keyword>CAMLOG43Ti-basefreelongK22654348</Keyword>
      <ClosedSupportFilename>CAMLOG_4.3_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.3</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.2</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P43</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.025616884231567383</x>
            <y>-1.600006103515625</y>
            <z>6.9565963745117188</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.043069005012512207</x>
            <y>-1.600006103515625</y>
            <z>7.0390195846557617</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0018575191497802734</x>
            <y>-1.5800018310546875</y>
            <z>7.3961873054504395</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1420_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.011879801750183105</x>
            <y>-1.5929641723632813</y>
            <z>9.2507114410400391</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-C_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-C</DisplayInformation>
          <Keyword>ELOS9A-C</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0018575191497802734</x>
            <y>-1.6257095336914063</y>
            <z>9.2232370376586914</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-C_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-C</DisplayInformation>
          <Keyword>ELOSIO9A-C</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0099630355834960938</x>
            <y>-2.3000030517578125</y>
            <z>7.4315366744995117</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D4.300_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-2.0999984741210938</y>
            <z>6.5466084480285645</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM43_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.17061710357666016</x>
            <y>-2.5780258178710938</y>
            <z>11.921679496765137</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.073018556589502681</x>
            <y>-0.997330582301368</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP27-SU0054_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>4.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_4.3-PS_CADCAMfreeLong_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_4.3_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_4.3_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 4.3PS Ti-base free long K2265.4308</DisplayInformation>
      <Keyword>CAMLOG43PSTi-basefreelongK22654308</Keyword>
      <ClosedSupportFilename>CAMLOG_4.3PS_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.8</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.2</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P43</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.025616884231567383</x>
            <y>-1.600006103515625</y>
            <z>6.9565963745117188</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.043069005012512207</x>
            <y>-1.600006103515625</y>
            <z>7.0390195846557617</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0018575191497802734</x>
            <y>-1.5800018310546875</y>
            <z>7.3961873054504395</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1420_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.011879801750183105</x>
            <y>-1.5929641723632813</y>
            <z>9.2507114410400391</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-C_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-C</DisplayInformation>
          <Keyword>ELOS9A-C</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0018575191497802734</x>
            <y>-1.6257095336914063</y>
            <z>9.2232370376586914</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-C_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-C</DisplayInformation>
          <Keyword>ELOSIO9A-C</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0099630355834960938</x>
            <y>-2.3000030517578125</y>
            <z>7.4315366744995117</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D4.300_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-2.0999984741210938</y>
            <z>6.5466084480285645</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM43_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.17061710357666016</x>
            <y>-2.5780258178710938</y>
            <z>11.921679496765137</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.073018556589502681</x>
            <y>-0.997330582301368</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP27-SU0054_Scanbody_4.3_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>4.2</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_5.0_CADCAMfreeShort_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_5.0_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_5.0_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 5.0 Ti-base free short K2247.5048</DisplayInformation>
      <Keyword>CAMLOG50Ti-basefreeshortK22475048</Keyword>
      <ClosedSupportFilename>CAMLOG_5.0_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.3</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.6</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P50</ID>
        <ID>CL_TT_P60</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.10044550895690918</x>
            <y>-2</y>
            <z>6.9481706619262695</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_5.0-6.0_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.17070579528808594</x>
            <y>-2</y>
            <z>7.2057905197143555</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_5.0-6.0_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.030185699462890625</x>
            <y>-1.7300033569335938</y>
            <z>7.39315128326416</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1430_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.034214794635772705</x>
            <y>-1.5442962646484375</y>
            <z>9.2915525436401367</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-D_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-D</DisplayInformation>
          <Keyword>ELOS9A-D</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0034830570220947266</x>
            <y>-1.5626068115234375</y>
            <z>9.2761859893798828</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-D_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-D</DisplayInformation>
          <Keyword>ELOSIO9A-D</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.019973933696746826</x>
            <y>-2.3000030517578125</y>
            <z>7.3473930358886719</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D5.060_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.028459787368774414</x>
            <y>-2.1500015258789063</y>
            <z>6.5908479690551758</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM5060_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-2.5847091674804688</y>
            <z>11.96591854095459</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.039104791730084729</x>
            <y>-0.99923511510742391</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP28-SU0055_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>2.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_5.0-PS_CADCAMfreeShort_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_5.0_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_5.0_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 5.0PS Ti-base free short K2247.5008</DisplayInformation>
      <Keyword>CAMLOG50PSTi-basefreeshortK22475008</Keyword>
      <ClosedSupportFilename>CAMLOG_5.0PS_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.8</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.6</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P50</ID>
        <ID>CL_TT_P60</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.10044550895690918</x>
            <y>-2</y>
            <z>6.9481706619262695</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_5.0-6.0_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.17070579528808594</x>
            <y>-2</y>
            <z>7.2057905197143555</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_5.0-6.0_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.030185699462890625</x>
            <y>-1.7300033569335938</y>
            <z>7.39315128326416</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1430_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.034214794635772705</x>
            <y>-1.5442962646484375</y>
            <z>9.2915525436401367</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-D_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-D</DisplayInformation>
          <Keyword>ELOS9A-D</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0034830570220947266</x>
            <y>-1.5626068115234375</y>
            <z>9.2761859893798828</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-D_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-D</DisplayInformation>
          <Keyword>ELOSIO9A-D</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.019973933696746826</x>
            <y>-2.3000030517578125</y>
            <z>7.3473930358886719</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D5.060_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.028459787368774414</x>
            <y>-2.1500015258789063</y>
            <z>6.5908479690551758</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM5060_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-2.5847091674804688</y>
            <z>11.96591854095459</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.039104791730084729</x>
            <y>-0.99923511510742391</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP28-SU0055_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>2.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_5.0_CADCAMfreeLong_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_5.0_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_5.0_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 5.0 Ti-base free long K2265.5048</DisplayInformation>
      <Keyword>CAMLOG50Ti-basefreelongK22655048</Keyword>
      <ClosedSupportFilename>CAMLOG_5.0_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.3</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.6</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P50</ID>
        <ID>CL_TT_P60</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.10044550895690918</x>
            <y>-2</y>
            <z>6.9481706619262695</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_5.0-6.0_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.17070579528808594</x>
            <y>-2</y>
            <z>7.2057905197143555</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_5.0-6.0_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.030185699462890625</x>
            <y>-1.7300033569335938</y>
            <z>7.39315128326416</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1430_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.034214794635772705</x>
            <y>-1.5442962646484375</y>
            <z>9.2915525436401367</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-D_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-D</DisplayInformation>
          <Keyword>ELOS9A-D</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0034830570220947266</x>
            <y>-1.5626068115234375</y>
            <z>9.2761859893798828</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-D_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-D</DisplayInformation>
          <Keyword>ELOSIO9A-D</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.019973933696746826</x>
            <y>-2.3000030517578125</y>
            <z>7.3473930358886719</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D5.060_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.028459787368774414</x>
            <y>-2.1500015258789063</y>
            <z>6.5908479690551758</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM5060_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-2.5847091674804688</y>
            <z>11.96591854095459</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.039104791730084729</x>
            <y>-0.99923511510742391</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP28-SU0055_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>2.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CAMLOG_Ti-Base_5.0-PS_CADCAMfreeLong_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CAMLOG_Screw_5.0_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>CAMLOG_Print-Model_5.0_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CAMLOG 5.0PS Ti-base free long K2265.5008</DisplayInformation>
      <Keyword>CAMLOG50PSTi-basefreelongK22655008</Keyword>
      <ClosedSupportFilename>CAMLOG_5.0PS_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AngulatedScrewChannelBendPointHeight>3.8</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.6</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>CL_TT_P50</ID>
        <ID>CL_TT_P60</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.10044550895690918</x>
            <y>-2</y>
            <z>6.9481706619262695</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Scanbody_5.0-6.0_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.17070579528808594</x>
            <y>-2</y>
            <z>7.2057905197143555</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_multi-use_Scanbody_5.0-6.0_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.030185699462890625</x>
            <y>-1.7300033569335938</y>
            <z>7.39315128326416</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Medentika_C-1430_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>MEDENTiKA Scanbody</DisplayInformation>
          <Keyword>MEDENTiKAScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.034214794635772705</x>
            <y>-1.5442962646484375</y>
            <z>9.2915525436401367</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_9A-D_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS 9A-D</DisplayInformation>
          <Keyword>ELOS9A-D</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.0034830570220947266</x>
            <y>-1.5626068115234375</y>
            <z>9.2761859893798828</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Elos_IO-9A-D_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>ELOS IO 9A-D</DisplayInformation>
          <Keyword>ELOSIO9A-D</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.019973933696746826</x>
            <y>-2.3000030517578125</y>
            <z>7.3473930358886719</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_NT_CAM-9.S3D5.060_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>NT Scanbody 3D-Guide</DisplayInformation>
          <Keyword>NTScanbody3D-Guide</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.028459787368774414</x>
            <y>-2.1500015258789063</y>
            <z>6.5908479690551758</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_Geomedi_SC-CAM5060_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>GeoMedi SC Scanbody</DisplayInformation>
          <Keyword>GeoMediSCScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.060019254684448242</x>
            <y>-2.5847091674804688</y>
            <z>11.96591854095459</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>-0.039104791730084729</x>
            <y>-0.99923511510742391</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CAMLOG_DTI_BP28-SU0055_Scanbody_5.0-6.0_EXO_Rev00.stl</MarkerFilename>
          <DisplayInformation>DTI SG Scanbody P</DisplayInformation>
          <Keyword>DTISGScanbodyP</Keyword>
          <ReferenceRotationOffset>2.7</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <SignatureDate>2025-11-28T16:02:20.1511283Z</SignatureDate>
  <InfoSignatureV4>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</InfoSignatureV4>
  <InfoSignatureV5>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</InfoSignatureV5>
  <InfoSignatureV6>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</InfoSignatureV6>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename>preview.png</Filename>
      <Signature>TZYXPWSP9QtJt4j7kukqjRzG4V89FZ+mYH8F/QyWc7g7sYrpYrWbZFn5/C7h25hHmcYX69GgzbhPpC/zaUjOpg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_Camlog.jpg</Filename>
      <Signature>OirZtw51NeOPsqZ3O7cCBbRBkhK/LgYRZXw7CWzrt2c7moDEYNDb7JpjfUQFOFkuQHjf9JReCipaOZ7D1LkyWg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_3.3_CADCAMfreeShort_EXO_Rev00.sdfa</Filename>
      <Signature>n6DjLeul/dPZfzhiEdWH5yCl9C3b8PMRtzzr/ZzJAF32c97OakEXtHyC2Z6h4s9oPJvm9kr/J2AQShCkfFr0qA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Print-Model_3.3_EXO_Rev00.sdfa</Filename>
      <Signature>k/2QmO2bJLMyzwNzSPLOscN+dSQ95mCutAegscsbR/aS8VbRxraxHfo+6aG1EqVN0I+eOnqeuY2nPeiSMza2RQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Screw_3.3_EXO_Rev00.sdfa</Filename>
      <Signature>a/pLCZ1+ldc7luBbcx6lt8fVDAlSEI1E3jW9JMPCgsfHwgp5lDZSXpeRW3zyylGkIxgPERtyiIwX6uh3CjyTAg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_3.3_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>JwtJavlHpoN3aq94cjwlUZ/A/v/ikLHZl6rLz6Fyl5rLz584sW8eykHPipUbEv8So6HFF7dhTQMWE/n/OP5YwA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Scanbody_3.3_EXO_Rev00.STL</Filename>
      <Signature>3fl9TrNMx5pZbTpTryRcTs+QgfOe0vlfD0yIFxFgCOQuZuUbMHdOclM5cc0oSakjk1GoLffVXincnuhRDgfBJA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_multi-use_Scanbody_3.3_EXO_Rev00.STL</Filename>
      <Signature>3fl9TrNMx5pZbTpTryRcTs+QgfOe0vlfD0yIFxFgCOQuZuUbMHdOclM5cc0oSakjk1GoLffVXincnuhRDgfBJA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Medentika_C-1400_Scanbody_3.3_EXO_Rev00.stl</Filename>
      <Signature>HlimS/KoIDWzj5lYdbpbYsfTlDrjmlxmOaCl1eWmAEp6cUr2xvZjq+PVf18rvuVbvvBCDD3WUH8g3KTqquVAXA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Elos_9A-A_Scanbody_3.3_EXO_Rev00.stl</Filename>
      <Signature>9D9KHGoh53HP1PS3T/wwyFK2b0P11SaczXu0H6IHfKkWgoLTJ/qTGy96JFvovrqZuEGoWxAvuF9CEPlaTi40iQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Elos_IO-9A-A_Scanbody_3.3_EXO_Rev00.stl</Filename>
      <Signature>7kDOy2QIYkT7LEmp+Fs+hhMrtJnfQ6ZDah1x20yPaSxgdzgwTKEeOhVFuthf+neDgzrc4Ebt1EOLXVOj1ghHZw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_NT_CAM-9.S3D3.300_Scanbody_3.3_EXO_Rev00.stl</Filename>
      <Signature>Tmvl1dp1z+0BmCF9LCxE88sXWmYlbrcAMbHQ23NRQhX0saZgTvd0kSuracTvOmAOXnFy5ZaOnaUctCyP+Awhhg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Geomedi_SC-CAM33_Scanbody_3.3_EXO_Rev00.stl</Filename>
      <Signature>vFyrk5mV5qnYGEunuHQc6zX3CzjD8NDXd88XiFY0eG0lkPBdhdMjj9VT/XAhU1TkR6DTe6DSfNk2fcsSPOZpQQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_DTI_BP25-SU0052_Scanbody_3.3_EXO_Rev00.stl</Filename>
      <Signature>g9s5MtSydZe9cKYa809ZEY1L1aY5YUXl0JzkP2344cCsLuSL7k+IwuDD+rgEVU8aC0QpBYdmymEFu8c/Y14ZQQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_3.8_CADCAMfreeShort_EXO_Rev00.sdfa</Filename>
      <Signature>ACiQh1H4TxPszw8t/pMau+3zw5DcEa5JtsMDWhMthLAKPaQrmQBqrKXBFRsiE2/UraNOLw4mRZLGneJOT5RgZQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Print-Model_3.8_EXO_Rev00.sdfa</Filename>
      <Signature>d1GeJNR6o4j0nDF8eLysox9H3QCXW6ME5eUhK+rX8cX9pl/3vX5+A+3gOMrqiWxytrx8ufDZxfOoPNBXZtgVJw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Screw_3.8_EXO_Rev00.sdfa</Filename>
      <Signature>9Bn5R4Xnpdz+/lMLquo51bTeu+qTUJxBnFsPRP9/5t9mFt4kQIioT0+toIsTJxVkoYJXGr9UrJFE+D99esj8UQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_3.8_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>jR//lMpnTunm/rc3L13W2FYwnb54wKGWqF9i1OANThfk8g8N/kYioXWoclEgMx3B7KzZx3T0fB6b9FnXn4ClPg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Scanbody_3.8_EXO_Rev00.STL</Filename>
      <Signature>b7mzMLpQpIF8uFToCspdx0dJNQ9CuJbSd97oqAZ/wT0NVy6bRXCZURXI9TdLh3UqOAMlOItaYgPQEYoXoeTAWw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_multi-use_Scanbody_3.8_EXO_Rev00.STL</Filename>
      <Signature>b7mzMLpQpIF8uFToCspdx0dJNQ9CuJbSd97oqAZ/wT0NVy6bRXCZURXI9TdLh3UqOAMlOItaYgPQEYoXoeTAWw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Medentika_C-1410_Scanbody_3.8_EXO_Rev00.stl</Filename>
      <Signature>HlimS/KoIDWzj5lYdbpbYsfTlDrjmlxmOaCl1eWmAEp6cUr2xvZjq+PVf18rvuVbvvBCDD3WUH8g3KTqquVAXA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Elos_9A-B_Scanbody_3.8_EXO_Rev00.stl</Filename>
      <Signature>9D9KHGoh53HP1PS3T/wwyFK2b0P11SaczXu0H6IHfKkWgoLTJ/qTGy96JFvovrqZuEGoWxAvuF9CEPlaTi40iQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Elos_IO-9A-B_Scanbody_3.8_EXO_Rev00.stl</Filename>
      <Signature>jYvRb4cXHp5xq3PkOrPI2SCIhf8hObCB0+0CvgjlUZ+m6jbgHiKBb7Gj2BNMedi5WLq/mTCJlbWfHo8ReCTuuA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_NT_CAM-9.S3D3.800_Scanbody_3.8_EXO_Rev00.stl</Filename>
      <Signature>5A1weofa2KOzgmYDFdT5glwKe3ZpbkJRcpfrWv/btdWsexyzSFRFoVeKPpu3n2tS4eoi262giq7SOODrlup5oA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Geomedi_SC-CAM38_Scanbody_3.8_EXO_Rev00.stl</Filename>
      <Signature>8skZyvgBwrqGXCdgNWCmbPZqvRcm/P6XLcX8aUFVyqZDZ/sfcz4XVt7tX7GOxyGNKZiHBFS+0Td70Y+Amevo4g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_DTI_BP26-SU0053_Scanbody_3.8_EXO_Rev00.stl</Filename>
      <Signature>KAfedQeOpPgfqwq4Li4VNeXEnxOJL1vPtASdWEkjL1di9EvwOPHp+jDxeHDTXWmG4zqSMhu0c1uan4fcucjTQA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_3.8-PS_CADCAMfreeShort_EXO_Rev00.sdfa</Filename>
      <Signature>C5GO0w54fO4JlQaUcaZ6/dGfGX0dOJRUlrxYGa7dczAyd//36HH99zObOFRrGuqM7a1vXN5vjYbcQMZnboVKRQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_3.8PS_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>XRNNzivs0m62BPVYIZpB+SgKoS1fINYE6eguXY9N7wuLkiY78lMuS6j0ncbFgylNlN1UqmNVo1YmahsuJeCBFw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_3.8_CADCAMfreeLong_EXO_Rev00.sdfa</Filename>
      <Signature>WtkG/qm3CyWi2k5hs7/7HVm4FTJAb1ezL0Hg5byGaEqD8sGUjhpXXgfyqpMLdZ3EcIuMEkEDtJdRM4oiC8ketw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_3.8_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>ZlVSOJobcjWLLdbfUGu5BcaKvkJjbeUNhjbwsBZRonYHN755WaYaUh2Zcn2DIwrcWwG6ciDJ3mrg8iOymJJ9eA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_3.8-PS_CADCAMfreeLong_EXO_Rev00.sdfa</Filename>
      <Signature>iX2zTWGqkOrHHniByMTSPckpVeZpM1LDTEuBEcaND9zj+7d8rBaiolwwwLV0KC5D2J5mvslOuvW1PPEL2LOu3w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_3.8PS_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>KUd//1bqXophhhp9OyZPAHJesKEJAqWbk5uWhfbTzb9NZCxaAwMRmOhbs5pCSyW7VPqDnpuOuON+G3RmZlwrAA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_4.3_CADCAMfreeShort_EXO_Rev00.sdfa</Filename>
      <Signature>3eLwxv2x63YQinTgVUs5H358wTxmYz7EGgTkpSk1ItQkumJAz/QhWXVzCjXRgrVUnEqsP0JJ4Vco2NuUSgJfvw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Print-Model_4.3_EXO_Rev00.sdfa</Filename>
      <Signature>v3h/ML/DkFgb9nYA7zaBEWdiGP+ldnZH/VgxpiG/VyUX5tMhQGmko5k1fw2ZvIp6hDDx84pBeNo/JJaCVq301g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Screw_4.3_EXO_Rev00.sdfa</Filename>
      <Signature>Gm2uNuy9GrVoYyA29dSQzcaam5zVF9iNWFeoiQD9lqtpcohfhBF+i+WGyowdHSW4ABw7ZhwyjmdH40t5WQAQ4g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_4.3_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>s8N4EFwwC4LFcQnfVx5T2xzuXPiStHsrsQf4xsMKKFSBZ+QMa3y0ugLBmlO9KWvgOIae4qKMh+KKyX13EaIiXA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Scanbody_4.3_EXO_Rev00.STL</Filename>
      <Signature>UnDMr64viTog+O4C4BpIDxgb+2slFiswDVAjtbPane+za4a80zZgyN83C3EhxTxn3YZA29WCBFKvOIvmCGBHfA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_multi-use_Scanbody_4.3_EXO_Rev00.STL</Filename>
      <Signature>UnDMr64viTog+O4C4BpIDxgb+2slFiswDVAjtbPane+za4a80zZgyN83C3EhxTxn3YZA29WCBFKvOIvmCGBHfA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Medentika_C-1420_Scanbody_4.3_EXO_Rev00.stl</Filename>
      <Signature>eX3nCcErQcF6DMMbwfDCYJFJCiIe32ZvBj01Jd9ElIYqQ8olEUu5BW5GAFez30HOCDmd4rqNyzjCGFVTjnm0nA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Elos_9A-C_Scanbody_4.3_EXO_Rev00.stl</Filename>
      <Signature>9D9KHGoh53HP1PS3T/wwyFK2b0P11SaczXu0H6IHfKkWgoLTJ/qTGy96JFvovrqZuEGoWxAvuF9CEPlaTi40iQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Elos_IO-9A-C_Scanbody_4.3_EXO_Rev00.stl</Filename>
      <Signature>FMj+j341DJ9Nc2eDwEZdP4+oQyG/IUg/R40G6EwzB5hoGf1gcUeGnvrnFFcWm+cCbAXF3U9UU1QXYqtHky6Obg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_NT_CAM-9.S3D4.300_Scanbody_4.3_EXO_Rev00.stl</Filename>
      <Signature>5A1weofa2KOzgmYDFdT5glwKe3ZpbkJRcpfrWv/btdWsexyzSFRFoVeKPpu3n2tS4eoi262giq7SOODrlup5oA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Geomedi_SC-CAM43_Scanbody_4.3_EXO_Rev00.stl</Filename>
      <Signature>GLQ4XTKh23lSC5/QyvGzY8JQbhSE9wCyf0aafIGaGIrYyPsOKw+Hi3+gc8RsEhXVgpk0PIr2mEBUXYstzzHHhQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_DTI_BP27-SU0054_Scanbody_4.3_EXO_Rev00.stl</Filename>
      <Signature>a4j/TPD3YjDgami5WYonUBeD2GjpFHu/pIKz2l88zNJ/FqA1qA1j2M/YqYgbj4aD26+DOsiAqoyaXjbEuCqp7g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_4.3-PS_CADCAMfreeShort_EXO_Rev00.sdfa</Filename>
      <Signature>yQEY+QFYIGdI13GDkr/uPp5pHK6wuqpBW5huf1nJzED4TOEj+gJL/vgsE8aqQVNJbgPRsG+GraKtvEkbHZrB4A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_4.3PS_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>Y0uN/znE0BgXdBNbQjNr6v5A0w0nA7oNYrzCdHT04Vyvj1gY+XUS86cHrpkpHJu4MRr/Yst7oetrGSuvxvxCTg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_4.3_CADCAMfreeLong_EXO_Rev00.sdfa</Filename>
      <Signature>0cTz71qDBT7S3qg0wkcjKiiuq+m+zNfmHEaoNeawO1P8sU07Nd92I8nlf657r/RNoiVkZ3r9EhjsF3HFEgFBiA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_4.3_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>abmioasHki0IufSV+cK6egSuj2PLBrb8t7YPeHjan6ps86+7EFz/W4fAGfhXct5HXlb9ZH70X2m/h90Jd4zUsg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_4.3-PS_CADCAMfreeLong_EXO_Rev00.sdfa</Filename>
      <Signature>34gZoZgrctMp2qQ5xzbg+bQhzOFI0sVDkl/6xs9Fb5SDsx2h6ouXFLYxO55CGoRAmeEN5P5xaztRqCFL5/8hfg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_4.3PS_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>ERfGHCuB6gw/OmbppYePkmYyUZQOdFpmCb+QfJJZ32AnvMqQovpR3WRMphWd2aCKWOJt3gMLmITOumUBpmrdXA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_5.0_CADCAMfreeShort_EXO_Rev00.sdfa</Filename>
      <Signature>LydQzAdcWFmuCa3x1DJFgGwJtrQlF6MDnKacad0ls2IlN9h7ISoyLhYsV2K6yP2cb0uqyMPYP2XmQeAZ64WrFw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Print-Model_5.0_EXO_Rev00.sdfa</Filename>
      <Signature>oTKYGrQFEmxJ0YhFba7TKmtyYIT2SMoMIL713VDN3nV+KlPC5uZqP0YDGXdGuQ96SOFNw4YlpcFLiQbrvqF2xg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Screw_5.0_EXO_Rev00.sdfa</Filename>
      <Signature>9wJYerqdyAutmQKLYKOFxe+JxB401mGM5dyRytlCNFdOpw75YFg1m1gKHjeOdw3+HqjykSNnoqEaVNGv9BaCqA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_5.0_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>SYhDXW6hrUnzsB4hDO30T24cvgiZKrA5YWK1bY5kQTGMppNnK+cG64PiXMSi3HD1/gG6vxawpjnYGJr6z9wDzw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Scanbody_5.0-6.0_EXO_Rev00.STL</Filename>
      <Signature>uzMGEnFBTskK+qUZt2u/Hp0T92kO1+Io53ZqXOkEOOkB+KWRJOhlPR0ZMw13FBeJujWBYf9UgzSb0rAS9fuJwA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_multi-use_Scanbody_5.0-6.0_EXO_Rev00.STL</Filename>
      <Signature>uzMGEnFBTskK+qUZt2u/Hp0T92kO1+Io53ZqXOkEOOkB+KWRJOhlPR0ZMw13FBeJujWBYf9UgzSb0rAS9fuJwA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Medentika_C-1430_Scanbody_5.0-6.0_EXO_Rev00.stl</Filename>
      <Signature>lAZJD/GTrZxgPO7BlVgngSHQ8rEWtEiIN/xg3ad91X71sP67sTqghRTEodjc6k7u5Tv/sf+K4RJwghbhDPE5UQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Elos_9A-D_Scanbody_5.0-6.0_EXO_Rev00.stl</Filename>
      <Signature>9D9KHGoh53HP1PS3T/wwyFK2b0P11SaczXu0H6IHfKkWgoLTJ/qTGy96JFvovrqZuEGoWxAvuF9CEPlaTi40iQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Elos_IO-9A-D_Scanbody_5.0-6.0_EXO_Rev00.stl</Filename>
      <Signature>9D9KHGoh53HP1PS3T/wwyFK2b0P11SaczXu0H6IHfKkWgoLTJ/qTGy96JFvovrqZuEGoWxAvuF9CEPlaTi40iQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_NT_CAM-9.S3D5.060_Scanbody_5.0-6.0_EXO_Rev00.stl</Filename>
      <Signature>5A1weofa2KOzgmYDFdT5glwKe3ZpbkJRcpfrWv/btdWsexyzSFRFoVeKPpu3n2tS4eoi262giq7SOODrlup5oA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Geomedi_SC-CAM5060_Scanbody_5.0-6.0_EXO_Rev00.stl</Filename>
      <Signature>hgfgEkFMUZkbmsYcNiuIjB35j9MlrrgoHMw+INZ+kArZShvB8qfAVCrK2iqBvSVtIJ4GTXvT78snKFgAgxDKgA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_DTI_BP28-SU0055_Scanbody_5.0-6.0_EXO_Rev00.stl</Filename>
      <Signature>A5339ciu8iJ9VAVUPL/++BY9SC1le/qV132eq+5y1AJqm4wB66yM2NiQY+1agMOKHy8+qcbkbOZqtZ2uQepzOg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_5.0-PS_CADCAMfreeShort_EXO_Rev00.sdfa</Filename>
      <Signature>1jVaGF4AI0dzLtSLGQtowYNrqrGgyCfSnRyrQa0a6EFp2Rj8Nj5vNwxmqu0FYM7ZVMS4yA4FkLbSv2gQmkD9/A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_5.0PS_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>T0ITqRY/EE4gUj+tn3YfJ129iVoy9jKVAgG3U/7AbVfT/b1LfvjVuV6TcG0OykBlgIqY4gvYFK/UgJTR9nN9xw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_5.0_CADCAMfreeLong_EXO_Rev00.sdfa</Filename>
      <Signature>sRlf0/nEzySR/qwd84FWNfXr+rQdPLlucIWyMplxIrN7sDq6xkgWzbCtbDkO/Khd2mTxixb4FHzUdybSerTm8Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_5.0_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>TWZit4b2e4H1hr3VvsZEyee39bG8eUlRcqtc/WMMtCqx5urCkhejezlDDRPxeOUhY+KIGZ8y1hEbGIF2H/beCA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_Ti-Base_5.0-PS_CADCAMfreeLong_EXO_Rev00.sdfa</Filename>
      <Signature>3LlF29/io994OnlaXTb68iEWnQg/h5rVGl1gBwFGbCeGQZcFMYaNAErx5qy/8OsAUMn07TtioZwfVhb9jVUFXA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CAMLOG_5.0PS_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>7U29gKLYreu7ORbX7ZVUMarAImmSz9l1rRQLQYkiCCTOBZHt5CWj7My6DGAxatoGZCG9SH2loqwJ/4G5JU1atQ==</Signature>
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>