<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 8776] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <RegistrationClickCenter>
    <x>0</x>
    <y>0</y>
    <z>0</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>0</x>
    <y>1</y>
    <z>0</z>
  </AxisAsymmetric>
  <DisplayInformation>Camlog - CONELOG® Titanium base CAD/CAM free for crown for 6-cam connection</DisplayInformation>
  <IsWithInterface>true</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <Keyword>camlog_CONELOG_Ti-base_CADCAM_free_crown_6-cam</Keyword>
  <SupportOrientation>1</SupportOrientation>
  <AxisScrewChannel>
    <x>0</x>
    <y>0.017452406437283512</y>
    <z>0.99984769515639127</z>
  </AxisScrewChannel>
  <ReferenceHeightOffset>0</ReferenceHeightOffset>
  <ReferenceRotationOffset>180</ReferenceRotationOffset>
  <RotationLockCount>6</RotationLockCount>
  <Supplier>CAMLOG Biotechnologies</Supplier>
  <SupplierLink>https://www.camlog.com</SupplierLink>
  <SupplierVersion>2025-03-01 (only for DentalCAD 3.2 or higher)</SupplierVersion>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <PreviewV4IconFilename>preview.png</PreviewV4IconFilename>
  <SupplierV4IconFilename>CL_Camlog.jpg</SupplierV4IconFilename>
  <TypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CONELOG_3.3_GH0.8_Ti-base_free_short_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CONELOG_Screw_3.3_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>Conical_BioHorizons_CNILA_Analog_3.3-N_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CONELOG 3.3/N GH0.8 Ti-base free short C2247.3308</DisplayInformation>
      <Keyword>CONELOG33NGH08Ti-basefreeshortC22473308</Keyword>
      <ClosedSupportFilename>CONELOG_3.3_GH0.8_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
      <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
      <AngulatedScrewChannelBendPointHeight>4</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.23</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>BioH_TCC_P28-N</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>0.01414276659488678</x>
            <y>-1.5999984741210938</y>
            <z>7.0183706283569336</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_Scanbody_3.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.0081260502338409424</x>
            <y>-1.5999984741210938</y>
            <z>6.9466161727905273</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_multi-use_Scanbody_3.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CONELOG_3.3_GH2.0_Ti-base_free_short_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CONELOG_Screw_3.3_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>Conical_BioHorizons_CNILA_Analog_3.3-N_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CONELOG 3.3/N GH2.0 Ti-base free short C2247.3320</DisplayInformation>
      <Keyword>CONELOG33NGH20Ti-basefreeshortC22473320</Keyword>
      <ClosedSupportFilename>CONELOG_3.3_GH2.0_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
      <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
      <AngulatedScrewChannelBendPointHeight>5.18</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.23</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>BioH_TCC_P28-N</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.052663624286651611</x>
            <y>-1.5999984741210938</y>
            <z>7.0356912612915039</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_Scanbody_3.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.030394822359085083</x>
            <y>-1.5999984741210938</y>
            <z>7.1247663497924805</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_multi-use_Scanbody_3.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CONELOG_3.8_GH1.0_Ti-base_free_short_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CONELOG_Screw_3.8_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>Conical_BioHorizons_CRILA_Analog_3.8-R_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CONELOG 3.8/R GH1.0 Ti-base free short C2247.3808</DisplayInformation>
      <Keyword>CONELOG38RGH10Ti-basefreeshortC22473808</Keyword>
      <ClosedSupportFilename>CONELOG_3.8_GH1.0_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
      <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
      <AngulatedScrewChannelBendPointHeight>4.18</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.23</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>BioH_TCC_P30-R</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.030394822359085083</x>
            <y>-1.5999984741210938</y>
            <z>7.0356912612915039</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_Scanbody_3.8-4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.052663624286651611</x>
            <y>-1.5999984741210938</y>
            <z>7.1247663497924805</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_multi-use_Scanbody_3.8-4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CONELOG_3.8_GH2.0_Ti-base_free_short_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CONELOG_Screw_3.8_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>Conical_BioHorizons_CRILA_Analog_3.8-R_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CONELOG 3.8/R GH2.0 Ti-base free short C2247.3820</DisplayInformation>
      <Keyword>CONELOG38RGH20Ti-basefreeshortC22473820</Keyword>
      <ClosedSupportFilename>CONELOG_3.8_GH2.0_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
      <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
      <AngulatedScrewChannelBendPointHeight>5.18</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.23</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>BioH_TCC_P30-R</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.074932396411895752</x>
            <y>-1.5999984741210938</y>
            <z>7.2583789825439453</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_Scanbody_3.8-4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.074932396411895752</x>
            <y>-1.5999984741210938</y>
            <z>7.1024971008300781</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_multi-use_Scanbody_3.8-4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CONELOG_3.8_GH1.0_Ti-base_free_long_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CONELOG_Screw_3.8_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>Conical_BioHorizons_CRILA_Analog_3.8-R_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CONELOG 3.8/R GH1.0 Ti-base free long C2265.3808</DisplayInformation>
      <Keyword>CONELOG38RGH10Ti-basefreelongC22653808</Keyword>
      <ClosedSupportFilename>CONELOG_3.8_GH1.0_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
      <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
      <AngulatedScrewChannelBendPointHeight>4.18</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.23</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>BioH_TCC_P30-R</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.052663624286651611</x>
            <y>-1.5999984741210938</y>
            <z>7.1024971008300781</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_Scanbody_3.8-4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.052663624286651611</x>
            <y>-1.5999984741210938</y>
            <z>6.9911532402038574</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_multi-use_Scanbody_3.8-4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <InterfaceFilename>CONELOG_3.8_GH2.0_Ti-base_free_long_EXO_Rev00.sdfa</InterfaceFilename>
      <ScrewFilename>CONELOG_Screw_3.8_EXO_Rev00.sdfa</ScrewFilename>
      <ImplantFilename>Conical_BioHorizons_CRILA_Analog_3.8-R_EXO_Rev00.sdfa</ImplantFilename>
      <DisplayInformation>CONELOG 3.8/R GH2.0 Ti-base free long C2265.3820</DisplayInformation>
      <Keyword>CONELOG38RGH20Ti-basefreelongC22653820</Keyword>
      <ClosedSupportFilename>CONELOG_3.8_GH2.0_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</ClosedSupportFilename>
      <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">15</AxisScrewChannelMaxUserAngle>
      <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
      <AngulatedScrewChannelBendPointHeight>5.18</AngulatedScrewChannelBendPointHeight>
      <AngulatedScrewChannelDiameter>2.23</AngulatedScrewChannelDiameter>
      <ImplantConnection>
        <ID>BioH_TCC_P30-R</ID>
      </ImplantConnection>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.052663624286651611</x>
            <y>-1.5999984741210938</y>
            <z>7.080228328704834</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_Scanbody_3.8-4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody</DisplayInformation>
          <Keyword>CamlogScanbody</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>-0.074932396411895752</x>
            <y>-1.5999984741210938</y>
            <z>7.1693038940429688</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>0</x>
            <y>-1</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>CONELOG_multi-use_Scanbody_3.8-4.3_EXO_Rev00.STL</MarkerFilename>
          <DisplayInformation>Camlog Scanbody multi-use</DisplayInformation>
          <Keyword>CamlogScanbodymulti-use</Keyword>
          <ReferenceRotationOffset>0</ReferenceRotationOffset>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <SignatureDate>2025-11-28T16:04:58.6627850Z</SignatureDate>
  <InfoSignatureV4>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</InfoSignatureV4>
  <InfoSignatureV5>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</InfoSignatureV5>
  <InfoSignatureV6>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</InfoSignatureV6>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename>preview.png</Filename>
      <Signature>SyO2vrLv56ww30CQoGAU4lkv3KEuNUVxOThgWBwHL6EOit9Mbwf/WL7J90xM96o8epf3+HPYYLAzpEWCrnj0kQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CL_Camlog.jpg</Filename>
      <Signature>OirZtw51NeOPsqZ3O7cCBbRBkhK/LgYRZXw7CWzrt2c7moDEYNDb7JpjfUQFOFkuQHjf9JReCipaOZ7D1LkyWg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.3_GH0.8_Ti-base_free_short_EXO_Rev00.sdfa</Filename>
      <Signature>WHgwQpn9nDcDwsEOLksoYvtDlOavT0WvbSQaUEB8Ee5Gawnutslg3zyHl6XjqU9gtQGqTpHD91X3dt3ieYDbdQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Conical_BioHorizons_CNILA_Analog_3.3-N_EXO_Rev00.sdfa</Filename>
      <Signature>fYxmZxenqLiPFtmL2vn4CfPmRcchQW/ncN4xWUeiEXx1FG79abXZw3mPMvDY+gNrMPcwxXYKTzjrU39aOQeLhQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_Screw_3.3_EXO_Rev00.sdfa</Filename>
      <Signature>fweQe0lJLejWXAYASBdxlBGdNZqAi2+YdCwScokU+O3C2BAQhQFXYe7nnL3EsokvEjM+dD7d7BrtoEI7CENUWA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.3_GH0.8_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>lUkLMpvkh7hdA3rNlpnynjqWYUORoV1XzKh+x6lzDX/TxnDlKxVxxDBwrjwsvVzV5V7tfEAfswPJd+D/tjnRgw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_Scanbody_3.3_EXO_Rev00.STL</Filename>
      <Signature>wCX9BaRLyyRLogNKnnqVyX3MGfLOtN3AOqfOaxl+nw+uOslJ/hEI0yBZJxvZE2c7mRbq1Cli29RTU582XLerRA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_multi-use_Scanbody_3.3_EXO_Rev00.STL</Filename>
      <Signature>hWt0EswfNmfw58fe57xOp+Fr0wv+tWjZ8e6S3uaCHUaC+wWxH26WfsKZpjbrRuhvPm42Bkqthw5WTYtHVJaYSg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.3_GH2.0_Ti-base_free_short_EXO_Rev00.sdfa</Filename>
      <Signature>qwf9ZYIQSE7Smpt/3zrcGK9lLVB8pd+IZKtrn5ay/8/xIbkC25ChVR2HnZtF4yAghTJqjggFo8ZzgFfwYiUEEQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.3_GH2.0_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>DmVDHwZs+K5va5hPZJsR+I3mlOuQCPWmXgwTu+zhgW1+90XoGiERRNHoK5QbqN/rV60uZkZzahdIhHgOLyOy9A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.8_GH1.0_Ti-base_free_short_EXO_Rev00.sdfa</Filename>
      <Signature>+D0nSMAaUlECekmYTuvfEDgIMxISM2jhCCiQWbTkvb78Qa/dOn4xm9xB8fg6iHa9BJ8FEnG7n9x1JnEt4ljrEg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>Conical_BioHorizons_CRILA_Analog_3.8-R_EXO_Rev00.sdfa</Filename>
      <Signature>SVfZJEofh7FXk/zcBGXcM8Xy337w3+wXNdIuXDAu9UDPeRGLxQa99nj/3gPIT9ReUwqjvYCQiqsh2aWD8KbROw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_Screw_3.8_EXO_Rev00.sdfa</Filename>
      <Signature>uPNl/ImO7iJVBIIyOLxk9sZjCwb03ScN1FY0VEoXRKH5B+DAtMkKGqSQGocOIjxWHVzsYnM954SewMZif5pG3A==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.8_GH1.0_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>hfon3XEN+Hxk4jYvaJ/DoxydPCy3G68JQkHpvtyj3oq5K165RD/oMl89t1xJZ/IuKkDPe5xy1lz8BLdewelhqg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_Scanbody_3.8-4.3_EXO_Rev00.STL</Filename>
      <Signature>oBA8cexdqMUYLu5TechdHqbL4FOxAMcOWupf1UX/fB1JL2bL6DwPQClnl0mSasb2gwkKOKgFTdqZPueSuARv3Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_multi-use_Scanbody_3.8-4.3_EXO_Rev00.STL</Filename>
      <Signature>olKM5XtCX9J1dVcKhgbf1ABkUnUq1F6SzIjrDiV++SnIpesxZVWkpgxplw4uwoWnrR9AUEPNQ7otucooJsT45g==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.8_GH2.0_Ti-base_free_short_EXO_Rev00.sdfa</Filename>
      <Signature>6Gd3Wj00N/4kUiDsNJ57CNm40YX9kM2OoE1i/MwZ47bno9CU/0ft8nmyKotnoq18M9voWlbbfmheRQdZSYFMrw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.8_GH2.0_Ti-base_free_short_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>pb8ZS6ld93soTbnoGn6r+nOo01dWhguBSLYd49SdXCrZhZsmcZxNZY/BeLSg142DH7IWfEDiZlVkaRa1QV06mw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.8_GH1.0_Ti-base_free_long_EXO_Rev00.sdfa</Filename>
      <Signature>pVIpA6R42xg7QX2FARLggaBGtkgRVHdybBa1IF2HQkFA7wW0iCxLG8T6xldKLc59JMX0Pornb4EmYHPxUfxeUQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.8_GH1.0_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>obx20puUHhC7Sz5U/FxNO6QQrFTMdHW7LG26Lr+pdawvMl+elGsP6TDKuCgjFzMVEAphYsoV/yAX6BLgWz+ltQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.8_GH2.0_Ti-base_free_long_EXO_Rev00.sdfa</Filename>
      <Signature>n5Ybv9q7IxqSou3/EyrMqyC7uOL0uuI0r9pVbIOI/ZaScvgzM8AaEfT1V8nfMrNrnfk9nqEztLFV0og9Ta0KNg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>CONELOG_3.8_GH2.0_Ti-base_free_long_CAM_EXO_3.2_Rev00.sdfa</Filename>
      <Signature>0a1l/USNADhdXXYwlMHPIWkUBJuTBkfbBa4AVrb2RyHoOAk6SsJcmeIAxhbp1FxDR9wnhX0nBZ7gDDHWcR6goA==</Signature>
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>